#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
ba825dad |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: toradex: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
f271276f |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use random mac address if toradex config block is missing Set CONFIG_NET_RANDOM_ETHADDR=y, which sets random eth address in case there is no toradex config block programmed. In case of missing toradex config block the generated mac address was always the same, linked to serial number 0. Use random generated mac address instead. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
2abc3bbe |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Add sysinfo driver This commit introduces support for the Toradex sysinfo driver in U-Boot, which uses information from Toradex config block to print correct board model. In case the Toradex config block is not present sysinfo prints the model of the board provided by device tree removing per board specific prints. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
118b17b8 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: common: Use SETTINGS_R event to read toradex config block Use SETTINGS_R event to read toradex config block and checkboard() to print board info. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
28138dea |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Remove not necessary model prints from checkboard() Sysinfo prints the model obtained from device tree, checkboard() take info from hardware and tdx_checkboard() use the model retrieved by toradex config block. Remove the print from checkboard() function because the model obtained from toradex config block is the most complete. If toradex config block is missing the model info from device tree is enough. Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
32b64893 |
|
23-Feb-2024 |
Emanuele Ghidoli <emanuele.ghidoli@toradex.com> |
toradex: Fix recursive call to checkboard Since checkboard() is used instead of show_board_info(), in case toradex config block is missing or malformed, checkboard is recursively called. It prints a long list of "MISSING TORADEX CONFIG BLOCK" till the stack is full. Fixes: edb0ecd18708 ("toradex: Use checkboard() instead of show_board_info()") Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # Verdin iMX8M Plus Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
edb0ecd1 |
|
12-Nov-2023 |
Simon Glass <sjg@chromium.org> |
toradex: Use checkboard() instead of show_board_info() Boards can use a sysinfo driver if a particular model name is needed. Update this board to use checkboard() directly, rather than having a weak function laid on top of a weak function. Make all the checkboard() functions call the new tdx_checkboard() so that the same information is displayed. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
39e521f7 |
|
18-Jul-2023 |
Max Krummenacher <max.krummenacher@toradex.com> |
toradex: tdx-cfg-block: rework carrier board name handling Rework the rather big array of zero length strings with 4 entries of actual carrier board names to a array of structs which ties a pid4 to its correspondent human readable string. Provide an accessor to get the string for a given PID4. Rework the user of the information to use the accessor. Note that check_pid8_sanity() is used for early samples of Dahlia and the development board. Yavia isn't affected. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b86986c7 |
|
18-Oct-2022 |
Simon Glass <sjg@chromium.org> |
video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO Now that all the old code is gone, rename this option. Driver model migration is now complete. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
abe52f58 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Improve product/serial print during boot Add product id print in show_board_info(), with an increasing number of Toradex SKUs available with small differences it makes sense to print it. Move serial number print to a dedicated line, this prevents the previous line with the product name to overflow the 80 columns with any reasonable product name length. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
9762fbee |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: common: Remove #ifdef usage for 2nd ethaddr Fix checkpatch warn, use `IS_ENABLED(CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR)` instead of `#ifdef CONFIG_TDX_CFG_BLOCK_2ND_ETHADDR`. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
8b6dc5d3 |
|
21-Jul-2022 |
Francesco Dolcini <francesco.dolcini@toradex.com> |
toradex: tdx-cfg-block: Cleanup interactive cfg block creation Simplify interactive config block creation code, instead of having a a long list of questions and a complex tree of preprocessor directive to guess the exact SKU, just ask the user to select it from a list. The modules list is filtered out to include only SKUs that are supported by the specific u-boot binary in execution. Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
1cf4e79f |
|
20-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: add new toradex oui range Add new Toradex MAC OUI (8c:06:cb), to the config block. With this change we extend the possible serial-numbers as follows: For serial-numbers 00000000-16777215 OUI 00:14:2d is taken For serial-numbers 16777216-33554431 OUI 8c:06:cb is taken Lower 24-bit of the serial number are used in the NIC part of the MAC address, the complete serial number can be calculated using the OUI. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
7e27ce16 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: extend assembly version There are two decimal digits reserved to encode the module version and revision. This code so far implemented A-Z which used 0-25 of this range. This commit extends the range to make use of all 99 numbers. After capital letters the form with a hashtag and number (e.g. #26) is used. Examples: If the assembly version is between zero and 25 the numbering is as follows, as it also has been before this commit: 0: V0.0A 1: V0.0B ... 25: V0.0Z New numbering of assembly version: If the number is between 26 and 99 the new assembly version name is: 26: V0.0#26 27: V0.0#27 ... 99: V0.0#99 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
494ef10c |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use defines for string length With those defines the length can be reused and is in one place extendable. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
39ff0624 |
|
13-Jun-2022 |
Philippe Schenker <philippe.schenker@toradex.com> |
toradex: tdx-cfg-block: use only snprintf Prevent memory issues that could appear with sprintf. Replace all sprintf occurences with snprintf. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
421440f7 |
|
23-Jul-2021 |
Stefan Agner <stefan.agner@toradex.com> |
board: toradex: make USB PID from config block optional If config block support is enabled, USB gadget modes unconditionally use Toradex Product ID as USB PID. Some applications might prefer a different and/or static USB PID. Add a Kconfig configuration option to descide whether to use USB PID from config block or the fallback config option CONFIG_G_DNL_PRODUCT_NUM. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@gmail.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e6fd30dd |
|
14-Sep-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: drop legacy show_boot_logo function and use splashscreen Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Fixes: d324189772("toradex: common: show boot logo") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
d3241897 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: common: show boot logo Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
717fa2c8 |
|
15-Jul-2020 |
Igor Opaniuk <igor.opaniuk@toradex.com> |
toradex: tdx-cfg-block: add carrier board info printing Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
b75d8dc5 |
|
26-Jun-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
treewide: convert bd_t to struct bd_info by coccinelle The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
691d719d |
|
10-May-2020 |
Simon Glass <sjg@chromium.org> |
common: Drop init.h from common header Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
e7dcf564 |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Drop environment.h header file where not needed This header file is now only used by files that access internal environment features. Drop it from various places where it is not needed. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
9fb625ce |
|
01-Aug-2019 |
Simon Glass <sjg@chromium.org> |
env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
43bfc499 |
|
25-Mar-2019 |
Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> |
toradex: common: unify behaviour when config block is missing If the config block is missing, various things may fail or behave strangely on certain modules. This patch unifies that behaviour by using a fake MAC address, until user updates the config block. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
|
#
83d290c5 |
|
06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
9925f1db |
|
01-Apr-2018 |
Alex Kiernan <alex.kiernan@gmail.com> |
net: Move enetaddr env access code to env config instead of net config In order that we can use eth_env_* even when CONFIG_NET isn't set, move these functions to environment code from net code. This fixes failures such as: board/ti/am335x/built-in.o: In function `board_late_init': board/ti/am335x/board.c:752: undefined reference to `eth_env_set_enetaddr' u-boot/board/ti/am335x/board.c:766: undefined reference to `eth_env_set_enetaddr' which caters for use cases such as: commit f411b5cca48f ("board: am335x: Always set eth/eth1addr environment variable") when Ethernet is required in Linux, but not U-Boot. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
|
#
b08c8c48 |
|
04-Mar-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h> Thomas reported U-Boot failed to build host tools if libfdt-devel package is installed because tools include libfdt headers from /usr/include/ instead of using internal ones. This commit moves the header code: include/libfdt.h -> include/linux/libfdt.h include/libfdt_env.h -> include/linux/libfdt_env.h and replaces include directives: #include <libfdt.h> -> #include <linux/libfdt.h> #include <libfdt_env.h> -> #include <linux/libfdt_env.h> Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
#
35affd7a |
|
03-Aug-2017 |
Simon Glass <sjg@chromium.org> |
env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr() Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
fd1e959e |
|
03-Aug-2017 |
Simon Glass <sjg@chromium.org> |
env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr() Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
382bee57 |
|
03-Aug-2017 |
Simon Glass <sjg@chromium.org> |
env: Rename setenv() to env_set() We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
5d982856 |
|
17-May-2017 |
Simon Glass <sjg@chromium.org> |
arm: Include asm/setup.h explictly Include this header where needed so we do not need to rely on common.h. Signed-off-by: Simon Glass <sjg@chromium.org>
|
#
37fa4125 |
|
30-Nov-2016 |
Stefan Agner <stefan.agner@toradex.com> |
toradex: allow custom fdt board setup in board file The config block support currently uses the ft_board_setup function to patch the device tree with config block information. However, this does not allow to patch the device tree with board specific information. Rename the common setup function to ft_common_board_setup and use the call it from the board files directly. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
#
beaf4068 |
|
30-Nov-2016 |
Stefan Agner <stefan.agner@toradex.com> |
toradex: fix USB Download gadget fixup callback Use the proper config option to guard the USB Download Function fixup callback. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
|
#
a2777ecb |
|
16-Nov-2016 |
Marcel Ziswiler <marcel.ziswiler@toradex.com> |
toradex: config block handling Add Toradex factory configuration block handling. The config block is a data structure which gets stored to flash during production testing. The structure holds such information as board resp. hardware revision, product ID and serial number which is used as the NIC part of the Ethernet MAC address as well. The config block will be read upon boot by the show_board_info() function, displayed as part of the board information and passed to Linux via device tree or ATAGs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
|